Netgear WN3500RP Setup | Netgear N600 Extender

The Netgear WN3500RP Setup of N600 WiFi Range Extender not only improves your dual-band WiFi, but it also lets you stream songs to a wired speaker using Airplay or DLNA. You can also plug your printer into the USB port and print wirelessly from your iPhone or iPad using AirPrint. You can also connect 1 wired computer to your wireless network, including smart TVs, game consoles. Here, you can read the setup steps for the Netgear WN3500RP Extender Setup . Continue to read.

Netgear WN3500RP N600 Extender Setup

  1. Power on the Netgear WN3500RP Extender N600 and wait for the power LED to turn green.
  2. On a computer, open an internet browser. You can go directly to the Netgear Genie setup or type in the browser URL bar.
  3. Choose the name of your current wireless network to expand, then press Proceed.
  4. Enter your router’s key or passphrase, then press Proceed.
  5. If your wireless network does not appear, ensure that your extender is within the main network’s wireless range.
  6. Wait 2 minutes; your device will automatically disconnect from the wireless network.
  7. Return to the Extender Genie screen once your computer/device is successfully linked to your network.
  8. Your extender is now installed successfully if you see the “Congrats” page. Click Finish to close the setup page for the Netgear WN3500RP N600 extender.

New Netgear WN3500RP Firmware Update

Does your WiFi extender start acting oddly all of a sudden? Even after a proper Netgear WN3500RP Setup, does it not provide the speed required? If so, upgrade the firmware immediately via the Netgear Extender Setup .

Netgear extender firmware is a compilation of built-in hardware device instructions. In layman’s terms, it is essentially an operating system specifically intended for the make and model of your extender. Make sure your extender has the latest firmware update.

Here’s how to update your firmware for the Netgear WN3500RP:

  1. Switch on your Netgear WN3500RP N600 WiFi extender.
  2. Attach the extender to a router.
  3. Open a web browser of your choice.
  4. In the address bar, type My Wifi Ext Info and press Enter.
  5. Log in to the extender using your username and password.
  6. Go to the Setup menu and choose the Firmware Update option.
  7. Click on the Review button.
  8. If new firmware versions are available, click Yes to update the firmware.
  9. Wait while the Netgear WN3500RP firmware updates properly.

Netgear Range Extender WN3500RP SETUP With WPS Method

For the WN3500RP Netgear range extender setup using WPS:

  1. Power on your WN3500RP Netgear N600 extender.
  2. Place the extender and WiFi router in the same area.
  3. Plug your extender into an electrical socket.
  4. Wait for the power LED on the WN3500RP to turn green.
  5. Press the WPS button on the extender.
  6. The connection between your router and the extender is established if the WN3500RP Link Status LED lights white.
Scroll to Top